Filter Removal, Inspection and Replacement

To change a filter, remove the pump/ motor shroud to expose pump. If filter is dirty, replace.

Lubrication

Before plugging in compressor, make sure the crankcase is filled with 250ml/ 8.4 oz. of ISO 100 (SAE 30), non-detergent compressor oil, or Mobil 1 5W30 synthetic. Use dipstick to check oil-level.

To Drain and replace the oil:

-Place a suitable container underneath the drain to collect used oil.

-Remove oil drain plug with a 4mm hex wrench.

-When the used oil has drained, reinstall the drain plug and tighten using the 4mm hex wrench.

-Remove the dipstick

-Add 250ml/ 8.4 oz. of ISO 100 (SAE 30), non-detergent compressor oil, or Mobil 1 5W30 synthetic.

NOTE: Avoid overfilling with oil. Make sure to check that the oil level is not above MAX line on the dipstick.

- Re-insert the dipstick.

Oil fill hole

Drain

Plug

Storage

1.When not in use, compressor should be stored in a cool dry place.

2.Tank should be drained of moisture.

3.Hose should be disconnected and hung open ends down to allow any moisture to drain.

Maintenance Schedule

 

Operation

Daily

Weekly

Every 3 Months

 

 

Check Oil Level

●

 

 

 

 

Drain Tank

●

 

 

 

 

Check Air Filter

 

●

 

 

 

Check Safety Valve

 

●

 

 

 

Blow Dirt From Inside Motor

 

●

 

 

 

Change Oil

 

 

●

 

 

 

 

 

 

 

15