Operation
rinsing with the pressure washer | to move the machine |
n Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.
n Engage the lock out on the trigger handle by pushing up on the lock out until it clicks into the slot.
nRemove the nozzle by placing hand over nozzle then
pulling back the
• Use medium pressure nozzle (green) for items such as a car or boat.
• Use higher pressure nozzle for jobs such as stripping paint and degreasing the driveway. When using these nozzles, test a small area first to avoid surface damage.
n Start at the top of the area to be rinsed and work down, overlapping the strokes.
MOVING the pressure washer
See Figure 22.
NOTE: Never lift or carry this product using the moving handle.
n Raise the handle.
n Turn the pressure washer off.
n Tilt the machine toward you until it balances on the wheels then roll the machine to the desired position.
Fig. 22
17
