RIDGID RD80763 Assembly, KNOW YOUR pressure washer, crane lifting hook, engine switch, Fuel tank

Models: RD80763

1 28
Download 28 pages 40.48 Kb
Page 8
Image 8
KNOW YOUR pressure washer

FEATURES

KNOW YOUR pressure washer

See Figure 1.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

crane lifting hook

The crane lifting hook in the center of the unit makes lifting the machine for transportation and/or relocation easy.

engine switch

The engine switch is used in combination with the recoil starter grip to start the engine. It is also used to turn the engine off.

Fuel tank

This fuel tank has a maximum capacity of 0.95 gal. Use unleaded automotive gasoline in the engine.

HOSE storage

Once the high pressure hose is rolled, hang it on the front of the machine using the hook and loop strap for convenient storage.

recoil starter

The recoil starter is pulled to start the machine.

Dual Power Soap Nozzle

The Dual Power Soap Nozzle can be easily adjusted for long range or short range detergent application.

SPARK ARRESTOR

This engine is not factory equipped with a spark arrestor. In some areas it is illegal to operate an engine without a spark arrestor. A spark arrestor is available by calling customer service for assistance.

SUBARU® ENGINE

This EX21 Subaru engine enables the pressure washer to achieve 3,300 psi.

THERMAL RELIEF VALVE

This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of wa- ter. Once the water has cooled, the thermal relief valve will reset itself.

trigger handle

The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue.

trigger with lock out

Pulling the trigger releases a stream of water for high pressure cleaning. The lock out provides protection against unauthorized use.

ASSEMBLY

UNPACKING

This product requires assembly.

nCarefully cut the box down the sides then remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

NOTE: This tool is heavy. To avoid back injury, lift with your legs, not your back, and get help when needed.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-866-539-1710 for assistance.

PACKING LIST

Pressure Washer

Trigger Handle Rest (front and back)

Screw (2)

Lock Nut

30 ft. High Pressure Hose Injection Hose Auxiliary Handle Trigger Handle

Spray Wand

Nozzle Holder (with Quick-Connect Nozzle (4) and Dual

Power Soap Nozzle)

Nozzle Cleaning Tool

Rear Panel

Support Foot (2)

Torx Screws (4)

Bolts (4)

Nuts (4)

Wheel (2)

Washer (2) Axle (2) Hitch Pin (2)

4-Cycle Engine Oil (SAE30 or SAE 10W30) Torx Wrench

Flat Washer Operator’s Manual

Page 8
Image 8
RIDGID RD80763 Assembly, KNOW YOUR pressure washer, crane lifting hook, engine switch, Fuel tank, HOSE storage, Unpacking