RIDGID SR-60 Use and Care, Service, Ridge Tool Company  Elyria, Ohio  U.S.A, SeekTech SR-60

SeekTech SR-60

SR-60 Use and Care

•Use equipment only as directed. Do not operate the SR-60 unless you have read the operator’s manual.

•Do not immerse the antennas in water. Store in a dry place. This will reduce the risk of electric shock and instrument damage.

•Store idle equipment out of the reach of children and other untrained persons. Equipment is dangerous in the hands of untrained users.

•Maintain the instrument with care. Properly maintained diagnostic instruments are less likely to cause injury.

•Check for breakage of parts, and any other conditions that may affect the SR-60’s operation. If damaged, have the instrument serviced before using. Many accidents are caused by poorly maintained tools.

•Use only accessories that are recommended by the manufacturer for the SR-60. Accessories that may be suitable for one instrument may become hazardous when used on another.

•Keep handles dry and clean, and free from oil and grease. Allows for better control of the instrument.

•Protect against excessive heat. The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products that produce heat.

Service

•Diagnostic instrument service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified repair personnel could result in injury.

•When servicing a diagnostic instrument, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance

instructions may create a risk of electrical shock or injury.

•Follow instructions for changing accessories. Accidents are caused by poorly maintained equipment.

•Provide proper cleaning. Remove battery before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

•Conduct a safety check. Upon completion of any service or repair of this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

•Damage to the product that requires service. Remove the batteries and refer servicing to qualified service personnel under any of the following conditions:

o If liquid has been spilled or objects have fallen into product;

oIf product does not operate normally by following the operating

instructions;

o If the product has been dropped or damaged in any way;

oWhen the product exhibits a distinct change in performance.

CAUTION

Remove batteries entirely before shipping.

If you have any questions regarding the service or repair of this machine, call or write to:

Ridge Tool Company Technical Service Department 400 Clark Street

Elyria, Ohio 44035-6001 Tel: (800) 519-3456

E-mail:TechServices@ridgid.com

www.ridgid.com

Ridge Tool Company  Elyria, Ohio  U.S.A www.seektech.com 3