RIDGID manual Information Screen and Restoring Defaults Information Screen, SeekTech SR-60

SeekTech SR-60

version, serial number of the receiver, and its calibration date (Figure 61).

Figure 60: Setting a Frequency to “Currently

Available” Status

To switch to a “Currently Available” frequency that is

not yet “Checked-Active”, press the Menu Key and scroll down to the desired frequency; if it is not checked, press the Select Key to toggle the checkbox to “checked”. This sets the status of that frequency to “Checked-Active”. Press the Menu Key to return to the operating display, which will now be set to the frequency just activated. The SR-60 will show the chosen frequency and its icon on the left of the screen.

Selected frequencies in the Checked-Active set can be switched while the SR-60 is in use, by pressing the Frequency Key. The SR-60 will cycle down the list through the set of active frequencies from low to high, group by group, and repeat. Unchecking a frequency in the Main Menu will deactivate it, and it will then not appear when pressing the Frequency Key.

Note: If a frequency appears missing, look to make sure it is currently available in the Main Menu frequencies list. If it is, select it using the Select Key. If not, go to the Frequency Selection menu and the appropriate sub- category and select it there, checking the box to make it “Currently Available” and bring it into the Main Menu list. Make sure it is “checked” at both menu levels for it to appear in the current working set of frequencies.

Information Screen and Restoring Defaults

Information Screen

The information screen appears at the bottom of the menus choices list. Pressing the Select Key displays information about your locator, including software

Figure 61: Information Screen

Restore Factory Defaults

Pressing Select a second time will display the Restore Factory Defaults option. (See Figure 62.)

Figure 62: Restore Defaults Option

Use the Up and Down Keys to highlight either the “check” symbol to restore factory defaults, or the “X” symbol to NOT restore them.

Figure 63: Defaults Restored (Line Trace Mode)

Pressing the Menu Key without changing either checkbox will exit the option and leave things as they were.

34 www.seektech.com Ridge Tool Company  Elyria, Ohio  U.S.A