Introduction
Introduction
This manual provides the information needed to operate the AutoPrinter and identify the parts. To setup and install your AutoPrinter, refer to the Setup and Installation Guide included with your product.
Note: The term AutoPrinter applies to both the AutoEverest and the AutoPrism. AutoEverest and AutoPrism will be used only to refer to either AutoPrinter specifically.
AutoEverest | AutoPrism |
Operating system requirements
AutoEverest
The AutoEverest will run only on Windows 2000 Professional with SP4, Windows XP Professional with SP1 or SP2, and Windows Server 2003.
MacintoshThe AutoEverest will run only on Macintosh OS X v10.3/10.4.
AutoPrism
The AutoPrism will run only on Windows 2000 Professional with SP4, Windows XP Professional with SP1 or SP2, and Windows Server 2003.
Media requirements
Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct media requirements.
Ribbon requirements
Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct printer ribbons.
Label design requirements
Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for label design requirements.
110656_H | 1 |