TEMPERATURE CONTROLS - OPERATING
To turn off your hot water system.
During normal operation the system is left on.
To turn the system off simply press the On/Off button on any temperature controller (where fitted). This will shut the water heater down completely including the temperature controller digital display.
The on indicator will go out.
If hot water taps are opened when the Rinnai
Infinity is off, cold water will flow from the taps.
If the system is to be left off over the winter be sure to drain it down if there is a possibility of freezing temperatures.
Additional safety features.
Whilst the hot water tap is open, the following safety features apply:
•Temperature selection cannot be transferred.
•If a temperature of 430C or higher selected, and the temperature is decreased to below 430C, and then raised again the maximum available temperature will be 430C.
•Other controllers are unable to change the delivery temperature of the water.
Note
The temperature of the outgoing water is constantly monitored by a built in sensor. If the temperature of the outgoing hot water rises to more than 3ºC above the selected temperature shown on the digital display, or the preset limit if controllers are not fitted, the burner will automatically go out. The red operation indicator will also go out. The burner will ignite again once the outgoing hot water temperature falls to that shown on the digital display (or the
24
