FEATURES AND BENEFITS
Congratulations on purchasing the Technologically Advanced, Temperature Controlled, Rinnai Hot Water System.
•The Rinnai Infinity 24e NEVER RUNS OUT of hot water. As long as electricity, water, and gas supplies are connected, hot water is available when hot water taps are open.
•Built into the main
•The Rinnai Infinity external unit is a powered flue appliance. This makes it COMPACT, saving both floor and wall space.
•The temperature of outgoing hot water is CONSTANTLY MONITORED by a BUILT- IN SENSOR. If the temperature of the outgoing hot water rises to more than 3°C above the selected temperature the burner is shut OFF and only turned ON again when the temperature falls to below the selected temperature.
•The burner lights automatically when the hot water tap is opened, and distinguishes when the tap is closed. IGNITION IS ELECTRONIC, so there is no pilot light. When the hot water tap is off, no gas is used.
•Up to three temperature controllers can be mounted remotely from the heater. This offers the following additional features:
Localised temperature setting. Diagnostic message.
•‘Deluxe’ Temperature Controllers are an optional extra. These provide functions including Bath Fill, Voice Prompt, and Clock Setting.
•Temperatures selected at the controllers are retained in the SYSTEM MEMORY.
•Operating NOISE LEVEL IS VERY LOW.
•ERROR MESSAGES ARE DISPLAYED on the Temperature Controllers, assisting with service.
•FROST PROTECTION device built in as standard.
11
