FEATURES AND BENEFITS

Congratulations on purchasing the Technologically Advanced, Temperature Controlled, Rinnai Hot Water System.

•The Rinnai Infinity 26i and HD50i NEVER RUN OUT of hot water. As long as electricity, water, and gas supplies are connected, hot water is available when hot water taps are open.

•Built into the main micro-processor is the facility to LIMIT THE MAXIMUM TEMPERATURE of the hot water supplied. The water temperature may be limited to various maximum temperatures. This is particularly useful when the hot water unit is installed where young children or the infirm may be using the hot water. The Infinity 26i is delivered with a preset temperature of 550C, and the HD50i is delivered with a preset temperature of 650C. If required, the temperature limits can be changed by an authorised person. For further information, please contact Rinnai.

•The Rinnai Infinity and HD internal units are powered flue appliances. This makes it COMPACT, saving both floor and wall space.

•The temperature of outgoing hot water is CONSTANTLY MONITORED by a BUILT- IN SENSOR. If the temperature of the outgoing hot water rises to more than 3°C above the selected temperature the burner is shut OFF and only turned ON again when the temperature falls to below the selected temperature.

•The burner lights automatically when the hot water tap is opened, and extinguishes when the tap is closed. IGNITION IS ELECTRONIC, so there is no pilot light. When the hot water tap is off, no gas is used.

•Up to four temperature controllers can be mounted remotely from the heater. This offers the following additional features:

Localised temperature setting. Diagnostic message.

•‘Deluxe’ Temperature Controllers are an optional extra. These provide functions including Bath Fill, Voice Prompt, and Clock Setting.

•Temperatures selected at the controllers are retained in the SYSTEM MEMORY.

•Operating NOISE LEVEL IS VERY LOW.

•ERROR MESSAGES ARE DISPLAYED on the Temperature Controllers, assisting with service.

•FROST PROTECTION device built in as standard.

13

Page 12 Page 14
Page 13
Image 13
Rinnai 26i, HD50i user manual Features and Benefits, Operating Noise Level is Very LOW
Page 12 Page 14

26i, HD50i specifications

The Rinnai 26i and HD50i are two high-efficiency heating solutions designed to meet modern demands for comfort, convenience, and energy saving. These units are ideal for residential heating applications, delivering reliable warmth while also being mindful of environmental impacts and energy consumption.

The Rinnai 26i is a wall-mounted unit that offers exceptional performance and efficiency. With a compact design, it is perfect for both small and large spaces, making it versatile in various settings. One of the standout features of the 26i is its ability to provide continuous hot water and space heating simultaneously, making it exceptionally convenient for homeowners. The advanced modulation technology allows the unit to adjust its heating output based on demand, ensuring optimal comfort without excessive energy use.

Another notable aspect of the Rinnai 26i is its intelligent control system, which includes a user-friendly digital display and programmable thermostat. This allows homeowners to customize their heating schedules and maintain their preferred temperature with ease. Additionally, the unit is equipped with a range of safety features, including anti-frost protection, ensuring safe operation even in extreme weather conditions.

On the other hand, the Rinnai HD50i is designed for larger spaces and offers an impressive heat output. This gas heater features a stylish design, blending seamlessly with modern home aesthetics. The HD50i utilizes Rinnai's innovative convection technology, which effectively warms the room by circulating heated air, providing consistent comfort throughout the space.

The HD50i is also equipped with advanced airflow management systems that minimize hot and cold spots, ensuring even distribution of heat across various rooms. Both the 26i and HD50i models come with energy-efficient ratings that help reduce utility bills while lowering carbon footprints.

Ease of installation and maintenance is another advantage of both units; they are designed for straightforward setup and come with clear guidelines for servicing. This focus on user experience makes Rinnai heating systems a popular choice among homeowners.

In summary, the Rinnai 26i and HD50i represent the culmination of innovative heating technology, efficiency, and aesthetics. With their advanced features, environmental consideration, and user-friendly operation, these units stand out as top choices for efficient home heating solutions. Whether for a compact apartment or a spacious home, Rinnai provides versatile and reliable options for creating a warm, comfortable living environment.
Top Page Image Contents