Rinnai 26i, HD50i user manual Installation Instructions, Important Information

Models: 26i, HD50i

1 40
Download 40 pages 13.22 Kb
Page 5
Image 5
INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

IMPORTANT INFORMATION

1.Gas safety (Installation & Use) regulations 1998 are the ‘Rules in force’. In your own interest and that of safety, it is law that all gas appliances are installed by competent persons in accordance with the above regulations. Failure to install appliances correctly could lead to prosecution. Other persons should NOT attempt to install this equipment.

2.Unpack the appliance and check it carefully. If it appears to have any defects or damage DO NOT INSTALL, contact your supplier.

3.This appliance is for normal hot water supply only and should not be used as pool or spa water heater.

4.The heater must be installed in the vertical position with the gas and water connections on the underside pointing vertically downward.

5.Installation must be carried out in accordance with the current issue of the following:

Building regulations issued by the Department of the Environment and Building Standards (Scotland) Regulations.

I.E.E. Wiring regulations for electrical installations.

Gas safety (Installation and Use) Regulations current issue. BS 5546

BS 5440 BS 6891 BS 5482 BS 6700 Local byelaws Water regulations

Health and safety at work etc. Act 1974

Such other specifications and regulations that may supersede or complement the above documents.

Please be sure that you are fully aware of your obligations and responsibilities under these regulations.

5

Page 5
Image 5
Rinnai 26i, HD50i user manual Installation Instructions, Important Information