E R R O R M E S S A G E S
This heater has the ability to check its own operation continuously. If a fault occurs, an Error Message will flash on the Digital Display of the control panel. This assists with diagnosing the fault, and may enable you to overcome a problem without a service call. Please quote the code displayed when inquiring about service.
CODE DISPLAYED | FAULT | REMEDY |
|
|
|
| Tilt Switch Activated | Turn heater ON, |
| after setting heater upright. | |
|
| |
|
|
|
| Miss Ignition | Check gas is turned ON. |
| Service call if repeated. | |
|
| |
|
|
|
| Flame Failure | Ventilate the room. |
| Service call if repeated. | |
|
| |
|
|
|
| Back Fire Sensor Activated | Turn heater OFF, after a while ON |
| again. Service call if repeated. | |
|
| |
|
|
|
| Overheat | Clean filter. |
| Service call if repeated. | |
|
| |
|
|
|
| Room Overheat | Service call. |
|
|
|
| Power cut | Turn heater OFF, |
| then ON again. | |
|
| |
|
|
|
If you see other codes displayed, contact Rinnai or your nearest service agent and arrange for a service call.
In all cases, you may be able to clear the Error Message simply by turning the heater OFF, then ON again. If the Error Message still remains or returns on the next operation, contact RInnai or your nearest service agent and arrange for a service call.
2 7