U S A G E A N D I N S T A L L A T I O N M U S T S

1.Read these rules and the instructions carefully. Check all local codes. Failure to follow these could cause a malfunction of the heater resulting in death, serious bodily injury and/or property damage.

2.This heater is designed for use only with one type of gas, either L.P.G. or Natural Gas. Make sure that the type of gas to be supplied to this unit matches that shown on the rating plate on the heater. This unit is not convertible.

3.WARNING: Any change to this heater or its controls can be dangerous.

4.If a gas leak is suspected, turn heater off, turn gas supply valve off at regulator or appliance connecter valve. Open windows to ventilate area immediately and contact your dealer or gas company.

5.Installation and repair should be done by a qualified service person. Heater should be inspected before use and at least annually by a professional service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compartment, burners and circulating air passageways be kept clean.

6.Keep area near the heater clear and free from combustible materials, gasoline and other flammable vapors and liquids.

7.Due to its high temperature, the heater should be located out of traffic and away from furniture and draperies.

8.Do not place clothing or flammable material on or near the heater.

9.Any safety panel or guard removed for servicing must be replaced prior to operating the heater.

10.An unvented gas heater will increase the amount of humidity in the room.

11.This heater is intended for space heating purposes only. Do not use for other purposes such as drying clothes or baking paints.

12.Do not touch the outlet area while the heater is in use. To avoid burns, do not move the heater during use and avoid touching the heater just after turning off.

13.Children and adults should be alerted to the hazard of high surface temperatures and should stay away to avoid burns or clothing ignition.

14.Young children should be carefully supervised when they are in the same room with the heater.

15.L.P.G containers must not be installed indoors.

16.Do not install in a windy area such as facing a window or a door leading to the outside.

17.Do not use this room heater if any part has been under water. Immediately call a qualified service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water.

18.Carpet lint or cigarette smoke may pass through the heater, discolor, and be deposited into the room.

19.This unit discharges a large volume of warm air at a low level to provide even heat distribution. If the air in the room contains cooking vapors, cigarette smoke, and if used on carpet, the surface in front of unit is subject to discoloration. Some carpets contain dyes which can be effected by warm air flow and could discolor. To aid in prevention of discoloration, place a mat under the unit to extend to the front 30 “.

Model RCE-229A

7

800-621-9419

Page 6 Page 8
Page 7
Image 7
Rinnai RCE-229A installation instructions A G E a N D Installation M U S T S
Page 6 Page 8

RCE-229A specifications

The Rinnai RCE-229A is a remarkable water heater that embodies advanced technology and efficient performance, meeting the needs of modern households. Designed with the consumer in mind, this appliance showcases exceptional features that not only enhance its functionality but also optimize energy usage.

One of the main features of the RCE-229A is its compact design, making it suitable for installations in tight spaces commonly found in urban environments. The unit's sleek appearance allows it to blend seamlessly into various settings, while its build quality ensures durability and longevity. The RCE-229A is designed for both indoor and outdoor installations, providing flexibility for homeowners.

This water heater operates using advanced gas technology, ensuring rapid heating and consistent temperature control. Equipped with a highly efficient burner system, it delivers hot water on demand without the need for a storage tank. This tankless design significantly reduces energy consumption, as water is heated only when needed, thereby minimizing waste and lowering utility bills.

The RCE-229A features a user-friendly digital control panel that offers precise temperature settings and easy operation. Consumers can easily adjust the temperature to their desired level, giving them full control over their hot water needs. The digital display also provides real-time feedback, allowing users to monitor performance effortlessly.

Safety is a top priority for Rinnai, and the RCE-229A comes equipped with multiple safety features. It includes an automatic shutoff mechanism that activates in case of a malfunction, preventing overheating and potential hazards. The unit also has a built-in flame failure device that ensures the gas supply is cut off if the flame goes out unexpectedly.

Moreover, the RCE-229A boasts a high energy efficiency rating, achieving significant savings in energy costs compared to traditional water heaters. This efficient operation not only benefits homeowners financially but also aligns with environmental sustainability efforts by reducing carbon emissions.

In summary, the Rinnai RCE-229A is a sophisticated water heating solution that combines innovative technology with user-friendly features. Its compact design, energy efficiency, safety mechanisms, and digital controls set it apart in the competitive market of water heaters. This model stands as a testament to Rinnai's commitment to quality and customer satisfaction, making it an excellent choice for anyone seeking a reliable and efficient hot water solution for their home.
Top Page Image Contents