O P E R A T I N G Y O U R N E W R C E - 2 2 9 A
TURNING ON
Press the ON/OFF button to operate the heater. The ON indicator will glow green. After approximately 20 seconds the spark generator will be heard before the burner ignites and the ON indicator glows red, indicating that the burner is alight. Warm air can be felt coming from the louvres 15 seconds later.
If the heater does not ignite on initial use, this may be due to air remaining in the gas supply line. The spark generator will only continue for 15 seconds. After this it will be necessary to press the ON/OFF button OFF, then ON again.
TURNING OFF
Simply press the ON/OFF button to switch off the heater. The ON indicator will go out. The convection fan will continue to operate for several minutes after the burner has gone out in order to cool the appliance. Do not unplug the appliance while the convection fan is running.
DO NOT turn heater off by unplugging at the power point.
The convection fan will continue to run until the appliance cools.
ROOM TEMPERATURE ADJUSTMENT
The room temperature and
Press the “S” button to increase the temperature setting or “T” button to decrease the temperature setting.
The temperatures can be preset to:
a)[L] low (about 50°F)
b)[60°F] to [80°F] in 2°F increments
c)[H] (continuously high)
If the heater does not ignite then the
AUTO-OFF FUNCTION
When you select
When the
Model | 1 3 |