Roberts Radio CR9987 manual Setting the alarms to wake to radio

Models: CR9987

1 36
Download 36 pages 48.78 Kb
Page 13
Image 13

Setting the alarms to wake to radio

1.Ensure that the radio is switched off (press StandBy).

2.Press and hold down the Alarm 1 or Alarm 2 button until the hour digit flashes.

3.Press the Tuning Up/Down buttons to set the correct hour.

4.Press the applicable Alarm button (1 or 2) to confirm. The minute digit now flashes.

5.Press the Tuning Up/Down buttons to set the correct minutes.

6.Press the applicable Alarm button (1 or 2) to confirm.

7.Press the Tuning Up/Down buttons to select TUNER.

8.Press the applicable Alarm button (1 or 2) to confirm.

9.Press the Tuning Up/Down buttons to select alarm volume - H (High), L (Low) or M (Medium).

10.Press the applicable Alarm button (1 or 2) to confirm.

11.At the preselected time the radio will switch on. The radio will switch off automatically after 90 minutes. The radio alarm may be switched off for 24 hours by pressing the StandBy button.

12.To permanently cancel the radio alarm set the alarm time as described, then select OFF using the Tuning Up/Down buttons.

If you need any further advice, please call our Technical Helpline on :-

1

3

5

7

9

11

2

2

4

4

6

8

7

10

1210

020 8758 0338 (Mon-Fri)

12

 

Page 13
Image 13
Roberts Radio CR9987 manual Setting the alarms to wake to radio