Roberts Radio DreamDock manual Scan sensitivity setting - FM

Scan sensitivity setting - FM

Your radio will normally scan for FM broadcasts which are strong enough to give good reception. However, you may wish the Auto-scan function to also be able to find weaker signals, possibly from more distant radio transmitters. Your radio includes a local / distant option for the Auto-scan function.

1.Press the On / Off control to switch on your clock radio.

2.If needed, press and release the Mode button until the FM band is selected.

3.Press and release the Menu button.

4.Press the Tuning Up or Down buttons until the display shows 'Scan Zone'. Press and release the Select button to enter the scan zone selection menu.

1

2

5.	Press the Tuning Up or Down buttons to switch between Local and		3
	Distant options on the lower line of the display. The Distant option will
	allow the radio to find weaker signals when scanning.
6.	Press and release the Select button to confirm your selection. The	4,5	4,5
	radio will then revert to the normal information display. The Local or

Distant setting is stored in the radio and remains in force until changed or until a System Reset.

4,6

Note: The initial setting (out of the box, or after a System Reset) causes the radio to ignore weaker (or more distant) signals.

If you need any further advice, please call our Technical Helpline on :-	22
020 8758 0338 (Mon-Fri)