System reset
If your clock radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure. The system reset can be carried out while the unit is in standby mode or while playing.
1. | Press and release the Menu button. |
| 1 |
|
| ||
2. | Press the Tuning Up or Down buttons until 'Factory Reset' appears |
|
|
| on the display. Press and release the Select button. | 2,3 | 2,3 |
|
| ||
3. | Press the Tuning Up or Down buttons until 'Yes' appears on the |
|
|
| display. If you do not wish to carry out a system reset, highlight 'No' |
|
|
| and then press the Select button. The display will revert to the previous |
| |
| display. |
|
|
4.With 'Yes' displayed, press and release the Select button. A full reset will be performed. The station list and presets will be erased. Alarms will be cancelled and snooze and sleep timer settings will be set to their default values. The display will show 'Welcome Roberts' and after a few seconds a station scan search will be performed automatically. The display will show progress of the station search. The number on the right of the display is the number of stations that have been found.
In case of malfunction due to electrostatic discharge, reset the product as above to resume normal operation. If you are not able to perform the reset operation as above, removal and reconnection of the power supply may be required.
If a problem persists our technical staff would be pleased to offer any assistance on operating the clock radio. Our technical helpline number is 020 8758 0338.
If you need any further advice, please call our Technical Helpline on :- | 42 |
020 8758 0338 |
