Roberts Radio DreamDock manual Specifications Circuit Features, Frequency Coverage

Cautions

Do not allow this clock radio to be exposed to water, steam or sand. Do not leave your clock radio where excessive heat could cause damage such as in a parked car where the heat from the sun can build up even though the outside temperature may not seem too high. It is recommended that the DAB band be used wherever possible as better results in terms of quality and freedom from interference will usually be obtained than on the the FM band.

•The name plate is located on the underside of the unit.

•Your clock radio should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the clock radio.

•It is recommended to operate the product such that there is a minimum distance (10cm recommended) to adjacent objects in order to ensure good ventilation.

•The ventilation of the product should not be restricted by covering it or its ventilation openings with items such as newspapers, tablecloths, curtains etc.

•No naked flame sources such as lighted candles should be placed on the product.

•It is recommended to avoid using or storing the product at extremes of temperature. Avoid leaving the unit in cars, on window sills, in direct sunlight etc.

Specifications			Circuit Features
Power Requirements			Loudspeaker		57mm
Mains	AC 100	240V 50/60Hz (Adaptor)	Output Power		2 x 1.8 Watts
Frequency Coverage			Headphone socket		3.5mm dia
	FM	87.5-108MHz	Auxiliary Input socket		3.5mm dia
	DAB	174.928 - 239.200MHz
			Aerial System	FM	Wire aerial
				DAB	Wire aerial

The Company reserves the right to amend the specification without notice.

If you need any further advice, please call our Technical Helpline on :-	44
020 8758 0338 (Mon-Fri)