Roberts Radio DreamDock Setting the date manually

Setting the date manually

Normally your clock radio will set its date automatically using the DAB
radio signal. If no DAB signal is available and you need to set the date
manually, please follow the procedure shown below. The date may be set	1
while the unit is in standby mode or while playing.

1. To set the date, press and release the Menu button.

2.	Press the Tuning Up or Down buttons until 'Date Set' appears on the	2-8	2-8
	display.
3.	Press and release the Select button. The day will then flash on the		3-9
	display.

4.Press the Tuning Up or Down buttons to change the day as needed.

5.Press and release the Select button to enter the day setting. The month will then flash on the display.

6.Press the Tuning Up or Down buttons to select the current month.

7.Press and release the Select button to enter the month setting. The year will then flash on the display.

8.Press the Tuning Up or Down buttons to select the current year.

9.Press and release the Select button to confirm the date setting. The clock radio will exit the menu.

If you need any further advice, please call our Technical Helpline on :-	34
020 8758 0338 (Mon-Fri)