Roberts Radio DreamDock manual Using the clock radio for the first time

Using the clock radio for the first time

1.Place your clock radio on a flat surface.

2.Fully extend the wire aerial located on the rear of your clock radio. Place the wire antenna so that it is as straight as possible extending either above or below the radio.

3.Insert the adaptor plug into the DC socket located on the rear of your clock radio. Plug the adaptor into a standard 13 amp mains socket outlet. The display will show 'Welcome Roberts' for a few seconds.

IMPORTANT: The mains adaptor is used as the means of connecting the clock radio to the mains supply. The mains socket used for the clock radio must remain accessible during normal use. In order to disconnect the clock radio from the mains completely, the mains adaptor should be removed from the mains socket outlet completely.

Characters appearing on the LCD display indicate that the clock radio is connected to and powered from the mains supply.

6

If you need any further advice, please call our Technical Helpline on :-	6
020 8758 0338 (Mon-Fri)