Roberts Radio RDK-2 manual Operating your radio - DAB

Operating your radio - DAB

1.Place the wire antenna so that it is as straight as possible extending either above or below the radio.

2.Plug the mains lead into a wall socket and switch on the wall socket.

4.The radio will then display "Clock not Set...". The radio will scan for DAB signals and if a DAB signal is found it will then show the current

time and date in the display. 5

5.If no signal is received the radio will continue to display "Clock not Set".Try repositioning the antenna.Touch the On/Standby button and the radio will re-scan. If a signal is found the radio will then tune to a station and set the clock as soon as the time information is received. If necessary reposition again and touch the Auto tune button to re- scan until stations are found.

9