Roberts Radio RDK-2 manual Presetting stations, Recalling a preset station

Presetting stations

You may store your preferred DAB and FM radio stations to the preset station memories (1 to 5). The procedure for setting presets and using them to tune stations is the same for FM and DAB modes, and is described below. Note that the radio stores FM and DAB presets separately and so there are fi ve of each.

1.Touch the On/Standby button to switch on the radio.

2.Tune to the radio required station as previously described.

3.Touch the required Preset button for 2-3 seconds until the display shows e.g. "Preset 1 saved".The station will be saved under the chosen preset button. Repeat this procedure for the remaining presets.

4.Stations stored in preset memories may be over-written by following the above procedure.

Recalling a preset station

1.Touch the On/Standby button to switch on your radio.

2.Select the required waveband by touching the Band button.

3.Momentarily touch the required Preset button, your radio will tune to the station stored in preset memory.

Note: If you have not previously stored a preset station and the preset buttons are pressed "Empty preset" will be displayed.

1

3

1

2

3

11