Roberts Radio RDK-2 manual Alarm mode, Setting an alarm

Models: RDK-2

1 44
Download 44 pages 40.6 Kb
Page 30
Image 30
Alarm mode

Alarm mode

Your radio has an alarm which can be set to wake you to radio (DAB, FM), SD card playback or buzzer alarm. The alarm can be set to sound once, daily, on weekdays or at weekends. The alarm can be set whether the radio is on or in standby mode. In the event of a power interruption your radio has a built in memory chip that will maintain your alarm settings for when the power is restored.

Note: Alarm times are set using the 24 hour format. So for example, 2:30PM is entered as 14:30. If no buttons are pressed for 5 seconds, the radio will exit the alarm setup.

Setting an alarm

1.Touch Timer/Set button for 2-3 seconds to enter the timer options. The display will show "Set Clock".

Note that a short touch of the button will allow you to view the settings but not to change them.

2.Repeatedly touch the Tuning Up/Down buttons until "Alarm timer" shows on the display and then touch the Select button to enter the alarm setting menu. The alarm status will show on the display.

3.Repeatedly touch the Tuning Up/Down buttons until "On" appears on the display. Touch the Select button to confi rm the setting. If you want to turn the alarm off permanently touch the Tuning Up/Down buttons until "Off" shows on the display and then touch the Select button to confi rm.

4.Repeatedly touch the Tuning Up/Down buttons to choose the desired hour for the alarm and then touch the Select button to confi rm the hour setting.

1

2,3,4

2,3,4

Setting an alarm2,3,4

29

Page 30
Image 30
Roberts Radio RDK-2 manual Alarm mode, Setting an alarm