Roberts Radio RDK-2 manual Dynamic Range Control DRC settings - DAB

Dynamic Range Control (DRC) settings - DAB

The DRC facility can make quieter sounds easier to hear when your radio is used in a noisy environment.

1.Touch the On/Standby button to switch on your radio.

2.Touch the Info button for 2-3 seconds until the display shows “Station order.”

3.Touch the Tuning Up/Down button until the display shows "DRC value".

1

2

4.	Touch the Select button to enter adjustment mode.	3,5
5.	Touch the Tuning Up/Down button to select required DRC setting
	(default is 0) .	3,5

DRC 0 DRC is switched off, broadcast DRC will be ignored.

DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.

DRC 1 DRC is set as sent by broadcaster.

6. Touch the Select button to confi rm the setting. The display will return	4,6
to radio mode.

Note: Not all DAB broadcasts use the DRC function. If the broadcast does not provide DRC information, then the DRC setting in the radio will have no effect.

17