Roberts Radio RDK-2 manual Operating your radio - Search tuning FM

Operating your radio - Search tuning FM

1.Place the wire antenna so that it is as straight as possible extending either above or below the radio.

2.Touch the On/Standby button to switch on your radio.

3.Touch the Band button to select the FM band.

4.Touch the Auto tune button, your radio will scan in an upwards direc- tion (low frequency to high frequency) and stop automatically when it fi nds a station of suffi cient strength.

5.After a few seconds the display will update. The display will show the frequency of the signal found. If the signal is strong enough and there is RDS data present then the radio will display the station name.

6.To fi nd other stations, touch the Auto tune button as before.

7.To scan the FM band in a downwards direction (high frequency to low frequency) touch the Auto tune button for 2-3 seconds and then release.

8.When the waveband end is reached your radio will recommence tuning from the opposite waveband end.

9.Adjust the Volume control to the required setting.

10.To switch off your radio touch the On/Standby button.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

2

3

4

6,7

9

9

20