Connecting the sender

Notes:

When connecting two stereo receiver channels with a sender, you need to connect Input A and B at the rear panel of the sender.

Make sure that your amplifier is capable of supporting 5.1 or 7.1 surround mode.

Connecting the sender to an AV receiver (or surround sound receiver)

Caution: Turn off your amplifier when connecting the units.

To connect the sender to an amplifier:

1Connect the right surround speaker terminals of your amplifier to the right speaker terminals of the sender by connecting the red speaker wire to the Red (+) terminals, and the black speaker wire to the Black (-) terminals.

2Repeat Step 1 to connect the left surround speaker terminals.

Back of AV receiver

Back of Rocketboost sender

16