Manuals / Brands / Home Audio / Home Theater System / RocketFish / Home Audio / Home Theater System

RocketFish RF-RBWS02, RF-RBREC Connecting the receiver, Connecting the sender to the AC adapter, To connect the receiver:, To connect the sender to the AC adapter:

1 37

Download 37 pages, 3.25 Mb

Connecting the sender to the AC adapter

Caution: Plug in the AC adapter only after your amplifier/external audio device is connected to the sender.

To connect the sender to the AC adapter:

1Plug the AC adapter into a wall power outlet or the SWITCHED AC outlet of your amplifier when you connect an amplifier.

If you connect it to the SWITCHED AC outlet of your amplifier, each time you turn your amplifier on or off, the power is also turned on or off to the sender.

Note: The hub device must always be powered if you are operating other transmitters and receivers in the network. In this case it should be connected to a non-switched outlet, otherwise your network will not be operational. The Hub functionality operates in Standby or full power mode.

Note: Make sure that the AC outlet on your amplifier is the switched type.

Connecting the receiverTo connect the receiver:

1Connect the right surround speaker to the right speaker terminal of the receiver, using the supplied three-foot speaker cable, by connecting the red speaker cord to the red (+) terminals, and the black speaker cord to the black (-) terminals.

RF-RBKIT 19

Contents

Page Contents WARNING Important safety instructions Caution Front Sides / Top / Back Bottom Introduction How does Rocketboost™ work Features Sender front panel Sender back panel Receiver front panel Receiver back panel Remote control Setting up your wireless kit Building a 5.1-ChannelHome Theater System Building a 7.1-channelhome theater system Expanding the system in zone B Page Replacing the battery in the remote control To replace the battery: Connecting the sender Connecting the sender to an AV receiver (or surround sound receiver) To connect the sender to an amplifier: Page To connect the sender to an external audio source: Connecting the sender to the AC adapter To connect the sender to the AC adapter: Connecting the receiver To connect the receiver: Connecting the receiver to an AC power outlet To connect the receiver to an AC power outlet: Using your wireless kit Establishing communication Listening to the system To listen to the system: SOURCE NEXT SOURCE Activating high definition audio Adding a station Tuning in to a station SOURCE Using your remote control Controlling the volume Controlling the device volume Controlling the stream volume Muting all devices Mute Troubleshooting Specifications Sender Receiver Legal notices FCC Part FCC warning Copyright Page One-yearlimited warranty How long does the coverage last What does this warranty cover How to obtain warranty service Where is the warranty valid