TM
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
#
1
2
3
4 & 10
5 & 9
6 & 8
7
Feature |
|
Standby LED | Turns red when the sender is in standby mode. |
Power/Join | Press to turn the sender on. Press and hold to initiate joining. Press again to go to |
button | standby. When the AC adapter is plugged in, the Sender automatically powers up. |
Power/Join | Lights steady in |
indicator | Blue when the Hub Enable switch is set to DISABLE) |
| Blinks quickly in joining mode. |
| Blinks slowly when the device is not part of a network or the hub is not powered. |
HD A/B indicator Lights when the high definition function is activated.
HD A/B button | Press repeatedly to toggle between CD and HD audio link modes for input A and input |
| B respectively. When the HD function is activated, the audio quality will be enhanced. |
Source A/B | Press to enable the source to be transmitted onto the network and press again to |
button | disable the source. The status will be shown on the indicator. Make sure your hooked |
| up speaker outputs match the enabled source, sound will not be sent unless the inputs |
| connected have a corresponding activated source. |
Source A/B | LED is illuminated steadily when a source is being transmitted. LED is off when no |
indicator | source is enabled. LED blinks for a short while when a receiver selects this source to |
| listen to. |
8