Connecting the sender to an external audio source (such as an iPod® or MP3 player)

Caution: Turn off your audio source players while connecting the units, and set their volume level to minimum.

To connect the sender to an external audio source:

1Connect an external audio source to the Pre-in A/B jack on the rear of sender using a 3.5mm male-to-male stereo cable (provided) and a 6”, 3.5 mm, female-to-RCA stereo cable (provided).

Sender back

To phones/Line Out/Audio Out jack of your iPod, TV, DVD, CD/PC/MP3 digital audio player.

•When your TV or digital audio player is connected to the Pre-in A/B jack of the sender for other media entertainment, the corresponding Speaker Input A/B terminals cannot be used. Once the 3.5 mm audio cable is removed from the sender, the input type will switch back to the Speaker Input A/B automatically.

•If you leave the 3.5mm audio cable connected to the Pre-in A/B jack, you can switch the audio source from Speaker Input A/B terminals by the remote control.

Note: For best audio quality, make sure that the volume setting on your MP3 player or other device is turned up to at lease 80%.

18