SPECIFICATIONS
MODEL- PUNCH (Pro Series) | 301SP | 401SP |
Maximum Power Rating |
|
|
All Channels | 900 Watts | 1200 Watts |
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4Ω Load Per Channel | 75 Watts x 2 |
2Ω Load Per Channel | 150 Watts x 2 |
4Ω Load Bridged (Mono) | 300 Watts x 1 |
Dimensions: (with Endbell) |
|
Height | 2.38" (6.05cm) |
Width | 9.85" (25.02cm) |
Length | 11.07" (28.12cm) |
Battery Fuse Rating (Amp) | 30A |
(External to Amplifier) |
|
Fuse Type | ATC |
| |
Crossover Slope |
|
Crossover Frequency |
|
Frequency Response |
|
Bandwidth
Damping Factor @ 4Ω (at output connector )
Slew Rate
IM Distortion (IHF)
Acceptable Signal Voltage Range
100 Watts x 2
200 Watts x 2
400 Watts x 1
2.38" (6.05cm) 9.85" (25.02cm) 11.07" (28.12cm)
40A
ATC
>100dB
12dB/octave Butterworth
variable from 50Hz to 250Hz
20Hz to 20kHz ±0.5dB
20Hz to 200kHz ±3dB
>200
30Volts/ms
<0.05%
Variable from 100mV to 6V (RCA Input)
Variable from 0.5V to 11V (High Level Input)
Protection | NOMAD - Internal |
| circuitry limits power in case of overload. Thermal |
| switch shuts down the amplifier in case of overheating. |
Equalization (45Hz Punch Bass) | Variable from 0dB to +18dB @ 45Hz |
Input Impedance | 20k ohms |
Specifications subject to change without notice
12