23
Getting Ready

Viewing the basic screen

The ATELIER has three types of basic display screen: the Rhythm
Screen, the Composer Screen and the Registration Screen.
You can alternate from one to the other by pressing the
[Display/Exit] button.

Rhythm Screen

Tempo
Rhythm Name
Beat Measure
Chord Name

Composer Screen

Tempo
Song Name
Beat Measure
Chord Name

Registration Screen

Next Registration set Name
Refer to “Load Next
Function” (p. 72).
Registration set Name
Tempo Beat Measure
Chord Name
Connections

Connecting to Output Device

You can connect the ATELIER to output devices such as speakers, and
use them to listen to the ATELIER’s sound.
The ATELIER does not have built-in speakers. To have sound be
reproduced, you’ll need to connect monitor speakers or a stereo set; or
you can connect headphones.
MEMO
To make connections, use audio cables that have 1/4-inch phone
plugs and that do not contain resistors.
* To prevent malfunction and/or damage to speakers or other devices,
always turn down the volume, and turn o the power on all devices
before making any connections.
1. Turn down the volume all the way on all equipment.
2. Turn o the power to the ATELIER and other connected
equipment.
3. Connect the ATELIER and other equipment with audio cables
(sold separately).
4. Turn on the ATELIER.
5. Turn on the connected equipment.
6. Adjust the volume.

Turning O the Power

1. Turn down the volume all the way on all equipment.
2. Turn o the connected equipment.
3. Turn o the ATELIER.

Connection example

Home use

Main Out jack
Powered speaker
(Amplier contained within)