77
Recording Your Performance
Advanced Recording MethodsRecording each part separately
In this method, each part (track button) is recorded one after another: rst the bass part, then the Lower part, etc. If there are any previously recorded
performances, you can listen to them as you record additional parts.

25 6 3

4

1. Select the panel settings needed for recording the performance.
2. Press the [Bwd] button or the [Fwd] button to select the desired measure (bar) when you start recording.
If you wish to start recording from the beginning of the song, press the [Reset] button.
3. Press the [Rec] button to enter recording standby mode.
The [Rec] button indicator will light, and the [Play/Stop] button and the unrecorded track buttons will blink.
The track buttons that are already recorded will light.
4. Press the button of the track you want to record, so it’s blinking.
The existing performance data in the specied track will be erased as recording takes place.
* When the button for a track lights steadily, it means it won’t be recorded.
5. Press the [Play/Stop] button to start recording.
When you press [Play/Stop] button, the metronome will sound a two-measure count, and then recording will begin. As you listen to the performance
data previously recorded, record the Part into a new Track.
6. Press [Play/Stop] button to stop recording.
The track button for which performance data has been recorded will be lit.
7. Repeat steps 2–6 to record each part.