Appendices
Troubleshooting
If you are encountering any problems with the equipment, please read the section below before determining that there has been any malfunction.
The piano cannot be switched on
- Is the power cord properly connected? (p. 7)
No sound is produced
-Is the Volume knob set to the minimum position? (p. 8)
-Are headphones connected? (p. 8)
When headphones are connected, the keyboard’s speaker stops playing.
-Is Local On/Off set to “Off?” (p. 21)
■When using external sound devices
No sound of external devices is produced
-Is the power to all equipment turned on?
-Is the volume setting in the external sound generator lowered?
-Are the MIDI connections between
-Is the MIDI channel setting correct? (p. 21)
-Is the Omni On/Off setting correct? (p. 22)
■When using MIDI sequencers
Two sounds are produced when the keyboard is played
- Is the keyboard in Dual Play mode? (p. 13)
The pitch of the keyboard sounds incorrect
-Is the Master Tuning setting correct? (p. 18)
-Is the Key Transpose setting correct? (p. 17)
The pedals are not functioning, or function intermittently
-Are the pedals connected properly?
Make sure the pedal cord is securely connected to the pedal jack on the back of the unit.
I can hear strange sounds when opening and closing the keyboard lid
- During normal operation, you may hear faint sounds
when opening and closing the keyboard lid.
926
The volume level of the instrument connected to the Input jacks is too low
-Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.
No sound of DP-1000 is produced
-Are the MIDI connections between
-Is the MIDI channel setting correct? (p. 21)
-Is the Omni On/Off setting correct? (p. 22)
Strange sounds (or two sounds) are produced when the
-With the sequencer’s “Thru” function on, the same notes may be sounded twice. Set the
23
