Before You Play
Connecting the AC Adaptor
NOTE
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
1.Connect the supplied AC adaptor and AC cord.
AC cord
AC adaptor
2.Connect the AC adaptor to the DC In connector on the rear panel.
3.As shown in the diagram, loop the AC adaptor
cord around the cord hook to fasten it in place.
Rear
DC In
4.Plug the AC cord into a power outlet.
As necessary, cramp the AC adaptor cord with the cord cramps (p. 7).
NOTE
To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), to avoid applying undue stress to the DC In connector, anchor the power cord using the cord hook, as shown in the diagram.
Even if the cord is fastened, strong tension applied to the cord may cause it to be damaged or broken. Be careful not to pull the cord accidentally, or to apply strong pressure to it.
Installing the Music Stand
1.Assemble the music stand as shown in the
diagram.
NOTE
When moving the piano, be sure to remove the music stand as a safety precaution.
NOTE
Do not apply excessive force to the installed music stand.
Connecting Pedals
Soft Pedal | Damper Pedal |
Soft Pedal
This pedal is used to make the sound softer.
Playing with the soft pedal depressed produces a sound that is not as strong as when otherwise played with the equivalent strength.
This is the same function as the left pedal of an acoustic piano.
Some tones are affected less than others.
Damper Pedal
Use this pedal to sustain the sound.
While the pedal is depressed, long lingering reverberations continue to be added to the sound after you release from the keys.
This is the same function as the right pedal of an acoustic piano.
NOTE
Unplugging a pedal cord from the unit while the power is on may cause the pedal’s effect to be applied without stopping. The power of the
10
