Roland HP101 owner manual Using Metronome, Sounding the Metronome, Stopping the metronome

Chapter 2. Performance

1 Hold down the [Tone] and [Metronome] buttons and press the “C ” or

“D ” key.

The volume balance changes.

Hold down the [Tone] and [Metronome] buttons and press the “C ” key to lower the volume of the Dual Tone.

Holding down the [Tone] and [Metronome] buttons and pressing the “D ” key raises the Dual Tone volume.

To return to the original volume balance, hold down the [Tone] and [Metronome]

buttons and press both the “C ” and “D ” keys simultaneously.

Using Metronome

■Sounding the Metronome

The HP101 features a built-in metronome.

1 Press the [Metronome] button, getting its indicator to light.

The metronome will sound.

The button flashes in red and green in time with the beat selected at that time. The button lights in red on the downbeats, and in green on weak beats.

Stopping the metronome

2 Once again press the [Metronome] button, getting the button to go dark.

The metronome will stop.

You can change the Dual

Balance by pressing any “C ” or “D ” key.

The beat is set to “weak beats only” when the power is turned on. When the beat is set to “weak beats only,” the [Metronome] button only flashes in green.

17