ViewSonic VPW450HD Connecting the Display, Connecting a DVD Player, Using Component Video Input

CONNECTING THE DISPLAY

Connecting a DVD Player

Using Component Video Input

1.Connect the green-colored (labeled as “Y”) jack from the DVD to the green-colored“Y1” jack of the display.

2.Connect the red-colored (labeled as “PR”or “CR”) jack from the DVD to the red-colored “PR1/CR1” jack of the display.

3.Connect the blue-colored (labeled as “PB”or “CB”) jack from the DVD to the blue-colored “PB1/CB1” jack of the display.

4.Connect the red (R) and white (L) audio jacks from the DVD to the R and L audio-in jacks located next to the “PR1/CR1” connector.

Using S-Video Input

1.Connect the S-Video (4-pin DIN) connector from the DVD to the “S-VIDEO” input on the back of display.

2.Connect the red (R) and white (L) audio jacks from the DVD to the R and L audio-in jacks located next to the S-VIDEO connector.

Using Composite (AV) Video Input

1.Connect the “yellow”(video) connector from the DVD to the yellow “VIDEO 1” input on the back of display.

2.Connect the red (R) and white (L) audio jacks from the DVD to the R and L audio-in jacks located next to the yellow “VIDEO 1” connector.

Note:

„There are two sets of component inputs provided. You can use either set of component inputs to connect your DVD.

6ViewSonic VPW450HD