ViewSonic VPW450HD manual Advanced Functions, Picture-In-Picture PIP / Split Screen

ADVANCED FUNCTIONS

Picture-In-Picture (PIP) / Split Screen

Turn On PIP or POP Mode		PIP Mode
1. Press the PIP key once on the remote control to			M : AV1		Input Source for
engage in PIP mode. Pressing the PIP again will					Main Picture
switch to POP mode. Pressing the PIP key sequen-			S : AV2	Input Source for
					Sub Picture
tially will cycle between:						Sub
						Picture
						Main
		POP Mode				Picture
						Main Picture
2. When engaged in PIP mode, a small window is dis-
played in one of the four corners. The OSD on the			M : AV1		Input Source for
			S : AV2		Input Source for
upper right corner will denote the input selected for						Sub Picture
						Sub Picture
main picture (large screen) and the sub-picture
(small screen) displayed.						Main Picture
3. If switched to POP mode, the screen will be split in
half. The screen on the left side is the main picture
and the screen on the right is the sub-picture. The						(Default)
OSD on the upper right corner will denote the input
signal source for both the main and sub-pictures.						Position 1
Changing the Sub-Picture Position in PIP
Mode
1. Once the PIP mode is turned on, you can switch the	Notes:
PIP sub-picture position to any one of the four cor-
ners of the screen.	1. POP (4:3) Mode will preserve 4:3 aspect ratio for
	both images displayed in the POP windows.
2. Press the POSITION key to switch position. Press-
	2. POP (16:9) Mode will preserve 16:9 aspect ratio
ing the POSITION key repeatedly will cycle	for both images displayed in the POP windows.
through all four corners of the screen.

3. This function is not applicable under POP mode.

Switching Main and Sub-Pictures (SWAP)

1.You can swap the main picture and sub-picture using the SWAP key. Press the SWAP key once to swap. Press the SWAP key again to switch back.

Changing the Input Source for Sub-Picture

1.Once the PIP or POP mode is turned on, you can change the sub-picture’s input source by pressing the SOURCE key.

2.Pressing the SOURCE key repeatedly will cycle through all available inputs for the sub-picture.

Changing the Input Source for Main Picture

1.Once the PIP or POP mode is turned on, you can change the main picture’s input source by pressing the INPUT SELECT key or any one of the

DIRECT INPUT KEYS.

All PIP and POP related set- tings are also accessible using the on-screen Menu display. Please see page 15 for details.

14ViewSonic VPW450HD