ViewSonic VPW450HD manual Connecting a VCR, External Audio Connections

Connecting a VCR

Using S-Video Input

1.Connect the S-Video (4-pin DIN) connector from the VCR to the “S-VIDEO” input on the back of display.

2.Connect the red (R) and white (L) audio jacks from the VCR to the R and L audio-in jacks located next to the S-VIDEO connector.

Using Composite Input

1.Connect the “yellow” (video) out connector from the VCR to the yellow “VIDEO 1” input on the back of display.

2.Connect the red (R) and white (L) audio-out jacks from the VCR to the R and L audio-in jacks located next to the yellow “VIDEO 1” connector.

External Audio Connections

Connecting External Amplified Speakers

1.This display can be connected to an external set of amplified speakers using the AUDIO OUT jacks located on the back of the display. In addition, this display is equipped with a small 3.5mm phono style plug for remote turn-on applications that will automatically send a remote turn-on/off signal to the external amplified speakers.

2.Connect the red (R) and white (L) AUDIO OUT jacks from right side of the connector panel to the external amplified speaker.

3.As an option, you may use the remote turn-on plug. Please note that not all external amplified speakers can accept remote-turn on signals.

Connecting to an External Amplifier

1.This display can be connected to an external amplifier using the AUDIO OUT jacks located on the back of the display. In addition, this display is equipped with a small 3.5mm phono style plug for remote turn-on applications that will automati- cally send a remote turn-on/off signal to the external ampli- fier.

2.Connect the red (R) and white (L) AUDIO OUT jacks from right side of the connector panel to the external amplifier or receiver.

3.As an option, you may use the remote turn-on plug. Please note that not all external amplifiers can accept remote-turn on signals.

Using the Subwoofer Out (Connecting a Subwoofer)

1.This display is equipped with a subwoofer output for con- necting to an external amplified subwoofer.

2.Connect a RCA cable from the subwoofer output jack to the external subwoofer.

Note:

„The AUDIO OUT RCA jacks can be set to either Fixed or Variable audio output lev- els. Please see page 19 for additional explanation of this feature.

„The RCA subwoofer outputs frequencies below 120Hz. The subwoofer will use the same Fixed or Variable audio output set- ting as AUDIO OUT RCA jacks.

„The 3.5mm phono/earphone output level is always used for remote turn on/off applica- tions.

8ViewSonic VPW450HD