Roland KR7/5 owner manual Loading Saved User Program Sets, 114

Chapter 5 User Program Registration

Determining the save destination

6.Touch <Disk> or <User>. (KR-7)

Touch <Disk> if you are saving to a floppy disk; touch <User> if you are saving to user memory.

7.Touch to select the save-destination User Program number.

If a User Program set name is displayed, a User Program set saved to that saved to that number is already.

If you select a number with previously saved User Program set data, then save a new set of data to that same number, the older User Program set will be deleted. If you don’t want to lose any previously saved User Programs, select a number in the save-destination column that does not yet have a name.

Save

8.Touch <Save> to begin the save.

Touch <Exit> to return to the User Program File screen.

*Never turn off the power or eject the floppy disk from the disk drive while the operation is in progress. Doing so will damage the KR-7/5’s internal memory, making it unusable.

→When clearing the set of saved User Programs, refer to “Deleting Saved User Program Sets” (p. 115).

■Loading Saved User Program

Sets

User Programs that have been saved on floppy disks or in user memory (KR-7) can be called up, on an individual set basis, to the [User Program] button.

*Note that calling up these User Programs results in the deletion of all User Programs currently recorded to the [User Program] button.

When loading a set of User Programs from a floppy disk, first insert the floppy disk in the disk drive.

→For more on working with the disk drive, refer to “Using Floppy Disks” (p. 104).

1.Press the [User Program] button.

2.Touch <File>.

3.Touch <Load>.

A “Load User Program screen” like the following

appears.

fig.d-upgload.eps_50

Chapter 5

Display of

the KR-7

Specifying the set of User Programs to be loaded

4.Touch < (Disk)> or < (User)>. (KR-7)

Touch < > if you are loading User Programs from a

floppy disk; touch < > if you are loading User Programs from the user memory.

5.Touch the name of User Program to load.

6.Touch <Load>.

The confirmation message appears.

7.Touch <OK>.

The selected User Programs are loaded to the [User Program] button.

*Never turn off the power or eject the floppy disk from the disk drive while the operation is in progress. Doing so will damage the KR-7/5’s internal memory, making it unusable.

114