Roland KR7/5 owner manual User Program Registration, Saving Performance Settings, 112

Chapter 5 User Program Registration

Saving Performance Settings	Determining the name of the User Programs
(User Program)	4. Touch <Rename>.

Any collection of settings, including those describing the current status of your data selections or settings Automatic Accompaniment, can be saved to the [User Program] button. You can then call up the stored settings by pressing the [User Program] button. Saving your preferred combinations of Music Styles and Tones, as well as other frequently used settings, makes it more convenient.

You can register up to 36 User Programs to the KR-7/5.

A “Rename screen” like the following appears.

fig.d-upgname.eps_50

Chapter 5

fig.panel_UPG

		When you touch	, the cursor moves.
	KR-7	When you touch the icon for the character to be input,
		the character appears of the cursor potion.
		For example, touching the <ABC> icon in succession
→	For more on what can be registered to a User Program, refer to	cycles you through the available choices in that character
		group (A→ B→ C→	A...).
	“Parameters Stored in the User Program” (p. 188).
1.	Set the Music Style, Tone, and other data until the	Each touch of <A-a-0-!> cycles the type of characters
		through “English (upper case),” “English (lower case),”
	settings are the way you want them.
		“numerals,” “symbols,” then back to “English (upper
2. Press the [User Program] button.		case).”
	A “User Program screen” like the one shown below	When you touch <Del>, the character at the cursor
		position is deleted.
	appears.
		When you touch <Ins>, a space is inserted at the cursor
fig.d-upg.eps_50
		position.
		5. When you have finished with the name, touch <Exit>.
		You’re returned to the Write User Program screen.
		Determining the write destination
		6. Touch	to select the write-destination
		number.
3.	Touch <Write>.	7. Touch <Write>.
	A “Write User Program screen” like the following	The confirmation message appears.
		8. Touch <OK>.
	appears.

fig.d-upgwrite.eps_50

The current performance settings are saved to the [User

Program] button.

* Never turn off the power while the display indicates <Executing...>. Doing so will damage the KR-7/5’s internal memory, making it unusable.

→ You can restore the content registered to the [User Program] button to the original factory settings. Refer to “Restoring the Factory Settings (Factory Reset)” (p. 155).

112