Roland KR7/5 owner manual Correcting Timing, Discrepancies Quantize, 127

				Chapter 6 Creating and Editing Songs
				■ Correcting Timing
Item	Content
				Discrepancies (Quantize)
	Data can be copied in the following three ways:
				You can correct for timing discrepancies in a recorded
	Replace
				performance by automatically aligning the music with the
	If there is a performance recorded at the copy
				timing you specify. This is called “Quantizing.”
	destination, this previous recording is erased,
	and the copied data is written in its place.			As an example, let’s say that the timing of some quarter-
				notes in a performance is a little off. In this case, you can
	Mix
	If there is a performance recorded at the copy			quantize the performance with quarter-note timing, thus
Mode	destination, the copied data is layered over the			making the timing accurate.
	previous recording. If the Tones used for the			fig.e-quantize.e
	copy source and copy destination are different,
					Example: Quarter-note resolution
	the copy-destination Tone is used.
					Actual note data
	Insert						1	2	3	4
	If there is a performance recorded at the copy
					Note data after quantization
	destination, the copied portion is inserted with-
	out erasing the previous recording. The song is				Example: Sixteenth-note resolution
	lengthened by the number of inserted mea-
	sures.				Actual note data
							1	2	3	4
■ Copying Rhythm Patterns to					Note data after quantization
Create Rhythm Parts
				At Step 3 of “Selecting the editing function” (p. 125), select
The KR-7/5 features numerous internal rhythm patterns.
				<Quantize>.
You can copy these rhythm patterns to create a rhythm part.
				A screen like the one shown below appears.
→ For more information about the name of Rhythm Patterns,
				fig.d-e-quant.eps_50
please refer to “Rhythm Pattern List” (p. 187).
At Step 3 of “Selecting the editing function” (p. 125), select
<Copy>.
For more about ordinary copying, please refer to “Copying
Measures (Copy)” (p. 126).
Select “Rhythm Pattern” as the <Src>.
This makes the setting for copying a built-in Rhythm Pattern.
											Chapter6
fig.d-e-copy2.eps_50
				Item		Content
				From		Measure number of the first measure of the
						segment to be quantized
				For		Number of measures to be quantized
						Track button or part number to be
				Tr/Pt		quantized
						Choosing “All” quantizes the same passage
• The rhythm pattern’s name and measure count are
						in all Parts.
indicated in the <From> column.
						Quantization timing
• The <Dst> is fixed at “Part 10.”
						Select one of the following values
• When the <Src> is switched to something other than
						1/2 (half note), 1/4 (quarter note),
“Rhythm Pattern,” the KR-7/5 is set to carry out normal				Resolu-
						1/6 (quarter-note triplet), 1/8 (eighth note),
copying.				tion
						1/12 (eighth-note triplet), 1/16 (sixteenth
Press the [		(Play/Stop)] button to play back and				note), 1/24 (sixteenth-note triplet),
						1/32 (thirty-second note)
confirm the rhythm pattern. The rhythm pattern stops when
you press the [			(Play/Stop)] button once more.	When finished with the Quantize settings, return to the Song
				Edit screen.

127