Roland KR7/5 Match the Tempo Before You Begin Playing Count, Touch Count, Cancelling the Count

Chapter 3 Song Playback and Practice Functions

Match the Tempo Before You Begin

Playing (Count In)

When you’re playing along with a song, you can listen to the tempo before you start playing by adding a count-in.

This audible count before the song playback is called a “Count-In.”

fig.panel3-3

1. Press the [Metronome] button and watch the indicator light up.

The Metronome screen (p. 44) appears.

If you are not using the metronome, press the [Metronome] button so its indicator goes out.

2. Touch <Count In>.

The following “Count In settings screen” appears.

fig.d-cntin.eps_60

3. Touch <Switch> to set this to “ON.”

With this setting, two measures count down before the song playback starts.

Cancelling the Count In

1. In the Metronome screen, touch <Count In>.

2. Touch <Switch> to set this to “OFF.”

This sets the KR-7/5 so that the count sound is not played.

Chapter 3

You can have a count sound be played before the song starts playing back by holding down the [Reset] button while you press the [Play/Stop] button.The status of the <Count In> settings won't be affected by your use of this procedure. .

For more about other settings on the Count-In settings screen, refer to “Settings for the Count-In” (p. 151).

85