Roland VA-76 User Program selection at power-on, Linking a Midi Set to a User Program, 131

VA-76 – Automatic functions for User Programs

Linking a MIDI Set to a User Program

MIDI Sets are “User programs for MIDI parameters”. There are eight such memories (see page 207). If you regularly use the VA-76 in different MIDI environ- ments (studio, live, band), preparing three MIDI Sets and linking them to the User Programs you usually use in the studio, on stage, etc., can be a time saver. In other situations, such a link could be dangerous, because it would reconfigure the VA-76’s MIDI parameters without you actually knowing it.

6.Press a MIDI Set [1]~[8] field to select the desired MIDI Set.

7.Press the MIDI Set [Link OFF] field to make it read [Link ON] if the selected MIDI Set should be recalled every time you select this User Program.

Note: Do not forget to write your User Program after chang- ing these settings (see page 127).

8.Press the [oBack] field and the [EXIT] field to return to the Master page.

User Program selection at power-on

Whenever you switch on the VA-76, it automatically selects User Program 00 Free Panel (see page 128). But maybe you prefer to be “operational” right away (without using the Virtual Band function). In that case, tell the VA-76 which User Program it should recall whenever you switch it on:

1.Press the [FUNCTION MENU] button.

2.Press the [Global Parameter] field on the Function Menu.

3.Press the [Startup] field in the bottom row of the display.

4.Press the [Startup User Program] field so that it is displayed in white.

5.Use [i][m] or the [TEMPO/DATA] dial, to select the User Program to be recalled.

If you don’t want a User Program to be recalled, select “Off”.

6.Press [EXIT] to return to the Master page.

131