VA-76 – User Style Micro mode

Move Mix

[FUNCTION MENU] button[User Style Composer] field[Micro] field[Move Mix]

Status— Use the [TEMPO/DATA] dial to select the Status of the new event (note, control change, etc., see the table on page 177). You may have to press the [Type] field if it is not displayed in white. Then press the [Value] field and specify the “identity” of the event (CC number, note number – [Type] only allows you to specify the kind of event to be inserted: note message, control change, etc.).

To insert a note event, you can also press the corre- sponding key on the VA-76’s keyboard. If the velocity value is not the one you need, either press the same key again (harder or softer) or use the [Velo] field to set it. Depending on the selected parameter, the dis- play now looks as follows:

Note: You can only program one note at a time. Playing a chord will only enter the last note you played.

Velo— As stated above, the Velo value does not neces- sarily refer to a velocity value. It is also used to indicate and (on this page) set the value assigned to the control change, etc. in question.

Gate T— The Gate T value can only be set for note events. Use it to specify the duration of the new note. Remember that Gate Time value “1” is enough for ADrums note events.

Erase— Press this field to get rid of the new event.

Note: Press [oBack] to jump back to the first Insert page if you need to change something.

Proceed— Press this field to confirm your settings and assign them to the event.

The Move function allows you move the selected event (or events) to another position. This is similar to using the Shift function (see page 180) but it applies only to one or a few events at a time.

From— Press the [From] field in the left column and the field of the first event you wish to move (this field must be displayed in white). Use the [o][k] fields or the [TEMPO/DATA] dial to call up other groups of 5 events (these are not selected automatically).

To— Press the [To] field. Next, scroll through the available events (using [o][k] or the [TEMPO/ DATA] dial) to jump to the page where the last event you wish to move is displayed. Press the desired field. All events between [From] and [To] are now selected.

Proceed— Now that the range of events to be moved is selected, press the [PROCEED] field to go to the sec- ond Move page:

The parameters on this page are used to specify the new position of the first event you selected on the pre- vious display page. All subsequent events will be posi- tioned relative to the first event (i.e. the distance between the moved events remains the same).

Bar, Beat, CPT— Use these fields and the [TEMPO/ DATA] dial to set the position the selected event(s) is (are) to be moved to. Just for your information, the Move function is automatically set to Mix, which means that moving events does not overwrite events that may be present at the selected destination.

Execute— Press this field to confirm your settings and move the selected events to the new position.

You could now press [CopyMix] to jump to the Copy function, or [oBack] to return to the opening Micro- scope page.

183

Page 181
Image 181
Roland VA-76 owner manual Move Mix, 183