VA-76 – Upper2 functions

1.Press the Keyboard Mode [OTHER] button.

M-FX

 

 

CONTROLLERS

EFFECTS

ONE TOUCH

MELODY

 

 

INTELL

 

 

MIN MAX

 

TRANSPOSE

M-VALUE

 

 

 

 

KEYBOARD MODE

 

USER PROGRAM

ON/OFF

SYNC

OTHER

ARRANGER

PIANO

DOWN

UP

 

 

 

 

 

FREE PANEL

The display now looks more or less as follows:

2.If the display does not look like in the above illus- tration, press the [KEYBOARD MODE] field in the upper right corner, and the [SPLIT] field.

Both must be displayed in white.

3.Press the [UP2 Split] field.

This field is now displayed in white and the keyboard is split at the G5, with the UP1 part to the right, and the UP2 part to the left of this second split point.

See page 37 for how to assign the desired Tone to the Upper2 part.

Note: UP2 Split only works if the Upper1 (UP1) part is active. It is impossible to program an Upper split without using the Upper1 (or VariPhrase) part. Once UP1 has been switched on (automatically or manually), you can, how- ever, switch it off. Furthermore, the UP2 part will be switched on as soon as you press the [UP2 Split] field.

If you don’t agree with this split point (G5), you can change it to any note between the F#1 and G7 (but never to the left of the main split point):

Possible range for UP2 Split

This clever system helps you to avoid that the UP2 Split zone “covers” either the LW/Arranger or the UP1 zone. There will thus always be room for the zones to the left and right of the UP2 zone.

4.Press the [Options] field.

The display now looks more or less as follows:

5.Press the [Upper2 Functions] field to select the fol- lowing display page:

As you see, the [UP2 Split] on this page already lights. If you no longer needed this function, you could use this field to switch it back off again. But that is not what we want to do here.

6.Use the [o][k] fields to the left and right of the keyboard for selecting the new split point.

7.Press [EXIT] to return to the Master page.

Note: If you are satisfied with your split point, you should save it to a User Program (see p. 127).

The UP2 Split function can be cancelled in two ways:

Press the [UP2 Split] field again so that it turns blue (either on this page, or on the opening display page when the [KEYBOARD MODE] and [SPLIT] fields are displayed in white).

After pressing the Keyboard Mode [OTHER] button, press the [WHOLE] field to switch off the SPLIT mode.

87

Page 85
Image 85
Roland VA-76 owner manual Both must be displayed in white, Press the UP2 Split field, Press the Options field