22
Clear internal memoryA song to be recorded must first be loaded into internal memory. You will need to clear the
memory before recording a new song.
<Procedure>
❶Press [UTILITY].
❷Press [6], then [ENTER].
The Song Initialize display (UTILITY/SngInit) appears.
❸Press [F6] (Execute) to clear internal memory.
Record the drums using realtime recordingRealtime recording allows you to record your performance as you play. It’s pretty difficult to
record multiple percussion instruments in realtime recording. We’ll use the Loop function to
record a bass drum, snare drum, hi-hat, etc., over a specified area repeatedly until your drum
set is complete. For the this drum set, we’ll use the “PR-A:001 PopDrumSet 1” sounds assigned
to Part 10 of a Performance.
<Procedure>
❶Press [SEQUENCER].
❷Make sure that “00:InternalSong” is selected.
If another song is selected, move the cursor to the song number and select the song by turning
the VALUE dial or pressing [DEC], then pressing [ENTER].
❸Press [REC].
The Realtime Rec Stand-by display (SEQ) appears.
✳To cancel recording, press [EXIT] or [REC].
❹Press [d] to move the cursor to “ ,” and set the tempo to 70. You can obtain this tempo by
turning the VALUE dial counterclockwise or pressing [DEC].
❺Press [r] to move the cursor to “Loop,” and select 4, by turning the VALUE dial clockwise or
pressing [INC].
This allows you to record four measures repeatedly.
❻Press [d] to move the cursor to “Mode,” and make sure that MIX is selected.
This allows you to record the measures with multiple percussion instruments played separate-
ly.