[FWD]
Use this button to
J.
[0]–[9] (Numeric keys)
Use these to set a value. They can be used to enter numeric values as well as alphabetical characters and notes.
[SHIFT]
This is used in combination with other buttons. Some buttons on the front panel include
[ENTER] / [DIGIT HOLD]
The function of this button changes depending on whether [SHIFT] is being held down or not.
ENTER: Use this button to finalize a value.
DIGIT HOLD: Press this button while holding down [SHIFT] to turn the Digit Hold function on/off. With the Digit Hold on, the 100’s place and 10’s place will be fixed and only the 1’s place will change. This means that you can select Patches simply by pressing the numeric key for the 1’s place, without having to press [ENTER].
K.
Display
Shows various information for the currently selected function or operation.
L.
VALUE dial
This dial is used to modify values. If you hold down [SHIFT] as you turn the VALUE dial, the value will change in greater increments.
❚Side panel
VOLUME | C 1 | C2 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VOLUME slider
This slider adjusts the overall output level from the rear panel OUTPUT and PHONES jacks.
C1 slider, C2 slider
Various parameters or functions can be assigned to these sliders, so you can control the sound source sec- tion as you play.
Pitch bend / modulation lever
This allows you to control pitch bend or apply vibrato. Depending on the settings, other specified parameters can also be controlled.
Floppy disk drive
3.5” 2DD/2HD floppy disks can be used. Press the eject switch located at the lower right of the disk drive to remove a disk.
4
