The sample song you’ve just recorded uses a preset Performance. However, that Performance’s
settings may not be ideal for your song. This section will explain how you can modify the
Performance to better suit your song. Different aspects of a Performance can be modified, but
as an example, let’s change the Patch “PR-A:001 64voice Piano” that is selected for the melody.
Then we’ll modify the name of the Performance and save the new settings.
Select a different Patch for the melody
<Procedure>
❶Press [PERFORM] to call up the Play display (PERFORM).
❷Press [F3] (Part).
The Part Param display (PERFORM/Part) will appear.
❸Press TRACK/PART [1] to select Part 1.
❹Press [u] or [d] to move the cursor to “Patch Group” or “Patch Number.”
❺Select a Patch you like by turning the VALUE dial or pressing [INC]/[DEC].
Play the keyboard to listen to the sounds while you select a Patch.
❻When you finish making settings, press [EXIT] to return to the Play display (PERFORM).
An asterisk “*” appears at the left of the Performance group on the display. This indicates that
the Performance settings have been modified.
Assign a new name to the Performance
The currently selected performance is named “Pop Set 1.” Let’s assign a new name to the newly
created Performance.
<Procedure>
❶Press [F1] (Common).
The Common display (PERFORM/Common) will appear.
❷Press [u] to move the cursor to “Performance name.”
❸Press [l] or [r] to move the cursor to the location where you want to enter a character.
❹Turn the VALUE dial, or press [INC]/[DEC] to select the desired character.
❺Repeat steps 3 and 4 to finish assigning the new Performance name.
❻Press [EXIT] to return to the Play display (PERFORM).
29
Create an appropriate Performance for the song