❚Rear panel
POWER
AC
Power switch
Press to turn the power on/off.
AC inlet
Connect the AC power cable (included) to this inlet.
✳With units rated for 117V operation, the AC cable is already connected to the unit.
| CONTROL PEDAL |
| HOLD |
| MIDI |
| |
4 | 3 | 2 | 1 | THRU | OUT | IN | |
OUTPUT MIX R jack, OUTPUT MIX L jack
These jacks output the audio signal to the connected mixer/amplifier system in stereo. For mono output, use the L jack.
PHONES jack
An optional set of headphones can be connected to this jack. Make sure that your headphones have an impedance of
CONTROL PEDAL 1–4 jacks
You can connect optional expression pedals to these jacks. By assigning a desired function to a pedal, you can use it to select or modify sound or perform vari- ous other control. You can also connect optional pedal switches to sustain sound.
HOLD jack
An optional pedal switch can be connected to this jack for use as a hold pedal.
MIDI connectors
These connectors can be connected to other MIDI devices to receive and transmit MIDI messages.
| CLICK OUT |
|
| DIRECT | OUTPUT | MIX |
| |
|
|
|
| PHONES | ||||
LEVEL | OUTPUT | R | L | R | L | |||
CLICK OUT LEVEL knob
Adjusts the level of the click sound to be output to external devices.
CLICK OUT OUTPUT jack
Connect a cable to this jack when sending clicks to external devices.
OUTPUT DIRECT R jack, OUTPUT DIRECT L jack
These jacks output only the direct sound (no effects applied) or EFX’d sound in stereo.
5
