6
The XP-80 does not contain an amp or speakers. In order to hear sound, you will need to con-
nect it to a keyboard amp, audio system, or headphones. Refer to the following diagram and
connect the XP-80 to the external equipment you are using.
<Procedure>
❶Before you make connections, make sure that power is turned off for all devices.
✳If the power is on when you make connections, you may damage your speakers.
❷Connect supplied AC power cable to the XP-80, and plug the other end into an AC power out-
let.
✳On 117V models the AC cable is permanently attached to the unit.
❸Connect audio cables and MIDI cables as shown in the diagram. If you are using headphones,
plug them into the PHONES jack. Connect pedal switches or expression pedals as necessary.
✳In order to take full advantage of the XP-80’s performance, we recommend using a stereo
amp/speaker system, If you are using a mono system, make you connections to the MIX OUT-
PUT jack L.
✳CONTROL PEDAL 1–4 jacks can also accommodate pedal switches.
Roland
Roland
Power outlet
Expression pedal or pedal switch
Pedal Switch
External MIDI device
Sterero headphones
Stereo set, etc. Speaker with built-in amp,
keyboard amp, etc.
OUTTHRU IN
MIDI
1
CONTROL PEDAL
32
4HOLD
AC
POWER
OUTPUT
RPHONES
L
MIX
Connect your XP-80