Find the Back Stand nested in the box.
1. Align the hole on the back stand with the matching hole on the back of the
player.
2. Plug in the lock pin into the aligned hole and fasten the back stand to the player.
3. You can adjust the viewing angle of your player by rotating the back stand.
For Wall mounting, please use a 7.0*25.3.0mm screw and for best result, please
screw over seven turns.
Turn On the Digital Picture Frame The power button is located at the back of the player as indicated in the right
figure. Press the power button to turn on the player and it will automatically load
supported media files on the memory card or in the internal memory. Once loaded,
it will begin to play automatically.
Helpful Tips
• This device supports following memory cards: SD, MMC, xD,
MS, MMC+, MS Duo, Compact Flash. Mini SD, Micro SD and
MS Duo can be played with an adaptor (not provided).
• You may also use a USB Flash Drive in this device.
• For further information on supported memory card types and file
formats, please refer the Product Specifications.